工业工程与管理系
力学与工程科学系
航空航天工程系
能源与资源工程系
生物医学工程系
材料科学与工程系
湍流与复杂系统国家重点实验室
药物信息与工程研究中心
北京大学系统与控制研究中心
水资源研究中心
应用物理与技术研究中心
先进电池材料理论与技术重点实验室
城市固体废弃物资源化技术与管理实验室
国家湿地保护与修复技术中心
清洁能源研究院
您的位置：首页 >> 教职员工 >> 陈永强

  1. Zhang Z, Chen Y*, Huang Z. A novel constitutive model for geomaterials in hyperplasticity [J]. Computers and Geotechnics, 2018, 98(102-13.

  2. Zhang Z G, Chen Y Q*, Huang Z P. Equivalent inclusions in micromechanics with interface energy effect [J]. Appl Math Mech-Engl, 2017, 38(11): 1497-516.

  3. Chen Y, Zhang Z, Huang R, Huang Z. Effect of residual interface stress on thermo-elastic properties of unidirectional fiber-reinforced nanocomposites. International Journal of Mechanical Sciences. 2016 Jul 31;113:133-47.

  4. Jia C, Chen Y*, Huang Z. New micromechanics model for saturated porous media with connected pores. Archive of Applied Mechanics. 2016:1-2.

  5. Jia C, Chen Y*, Huang Z. Iterative Method to Predict Effective Elastic Moduli of Multiphase Particulate Composites. Journal of Engineering Mechanics. 2015 Apr 29;141(8):04015025.

  6. 张振国, 陈永强*, 黄筑平. 含非均匀界面相粒子填充复合材料的有效比热. 力学学报 46.6 (2014): 896-904.

  7. Y. Q. Chen,  R. C. Huang, and Z. P. Huang. Effect of residual interface stresses on effective specific heats of multiphase thermoelastic nanocomposites. Acta Mechanica, 2014, 225(4-5): 1107-1119.

  8. Huang, Zhuping, Yongqiang Chen, and Shu-Lin Bai. "An elastoplastic constitutive model for porous materials." International Journal of Applied Mechanics 5.03 (2013): 1350035.

  9. Chen, Yongqiang; Huang, Ruchao; Huang, Zhuping; et al. Effective specific heats of multi-phase thermoelastic composites. Acta Mechanica Solida Sinica, 25(3): 262-276 ,2012

  10. 郑子君, 陈永强*, 陈璞. 无网格方法施加本质边界条件的主从自由度法. 计算物理, 29(2):159-165, 2012
  11. RC Huang, YQ Chen*. Effect of residual interface stress on effective thermal expansion coefficient of particle  filled thermoelastic nanocomposite. Applied mathematics and mechanics, 2011, 32(11): 1377-1388
  12. Pu Chen, Yu-Cai Gong, Yongqiang Chen*, S Kulasegaram. On Eigenvalue Error Bound in the Subspace Iteration Method. Communications in Numerical Methods in Engineering. 2011;27:113-127
  13. Yi Liu, Yongqiang Chen* and Sivakumar Kulasegaram. Projection method with self-adaptive time steps for LES of ignition and extinction in non-premixed jet flames. Commun. Numer. Meth. Engng. 2010;26:1203-1218
  14. Y Chen, S Kulasegaram, Numerical modelling of fracture of particulate composites using SPH method. Computational Materials Science. 47:60–70, 2009
  15. Liu JF, Chen YQ*, Sun SL. Small Polyhedron Reconnection for Mesh Improvement and its implementation based on advancing front technique. International Journal for Numerical Methods in Engineering. 79:1004-1018, 2009
  16. 赵前程，陈永强*, 刘奕，袁明武. 火灾作用下体育馆破坏数值分析应用. 基础与工程科学学报. 2008,16 (6)
  17. Jianfei Liu, Shuixiang Li, Yongqiang Chen. A fast and practical method to pack spheres for mesh generation. Acta Mech Sin. (2008) 24:439–447
  18. CHEN Yongqiang, SUN Shuli. Numerical simulation of mechanical properties and failure process of heterogeneous elasto-plastic material. Tsinghua Science and Technology. 12(5): 527-532, 2007
  19. Liu JF, Chen B, Chen YQ. Boundary recovery after 3D Delaunay tetrahedralization without adding extra nodes. International Journal for Numerical Methods in Engineering. 72(6): 744-756,2007
  20. Liu JF, Sun SL, Chen YQ. SPR-A new method for mesh improvement and boundary recovery. Computational Mechanics-Proceedings of ISCM 2007, July 30-August 1, 2007, Beijing China, Tsinghua University Press-Springer, 180-186
  21. Chen YQ, Kulasegaram S. Numerical modeling of fracture in particulate composites using SPH method. Computational Mechanics-Proceedings of ISCM 2007, July 30-August 1, 2007, Beijing China, Tsinghua University Press-Springer, (abstract), 342
  22. Chen Yongqiang, Yao Zhenhan, Zheng Xaoping. 3-D Numerical Simulation of Failure Processes in Heterogeneous Brittle Material. ACTA Mechanica Solida Sinica, 2002,15(4):332-341
  23. Chen Yongqiang, Yao Zhenhan, Zheng Xiaoping. Theoretical Statistical solution and Numerical Simulation to Heterogeneous Brittle Materials, ACTA Mechanica Sinica. 2003, 19(3): 276~284
  24. 陈永强, 郑小平, 姚振汉. 三维非均匀脆性材料弹性行为及破坏过程的数值模拟, 力学学报, 2002, 34(3): 351-361
  25. 陈永强, 郑小平, 姚振汉. 应用格形模型和统计方法分析两相材料宏观等效力学性质. 固体力学学报, 2001, 22(4): 394-402
  26. 陈永强, 林葱郁, 姚振汉, 郑小平. 非均匀材料破坏过程数值模拟的边界元法研究. 工程力学. 2003, 20(3) 19：25
  27. 陈永强, 孙树勋, 王清, 姚振汉. 裂纹板贴补后应力分析. 工程力学, 2000,17(3): 49-54
  28. 陈永强, 姚振汉, 郑小平. 非均匀脆性材料本构关系统计解析解. 清华大学学报, 2002, 42(11): 1515-1518
  29. 陈永强, 郑小平, 姚振汉. 非均匀材料的应变软化及叠层复合材料破坏过程的数值模拟. 计算物理, 2003,20(1), 14-20

  30. 陈永强, 姚振汉, 郑小平. 加筋材料的格形模型和统计数值方法, 力学季刊,  2002,23(3), 315-322

注：*通讯作者；斜体：研究生