1. Bai, S.L.,et al., Interfacial debonding behavior of a rigid particle filled polymer composite, Composite Interfaces， Vol.10, No.2/3, pp.243-253, 2003
2. Bai, S.L. et al., Plastic damage mechanisms of polypropylene/polyamide 6/polyethelene-octene elastomer blends under cyclic tension, Polymer 44(2003)6637-6647
3. Bai, S. L, et al., Microstructures and mechanical properties of polypropylene/polyamide6/polyethelene-octene elastomer blends, Polymer 45(2004)3063-3071
4. G’Sell, C., Bai, S. L.et al. Polypropylene/polyamide 6/polyethelene-octene elastomer blends, Part 2: measurement of plastic damage under uniaxial tension, Polymer 45（2004）5785-5792
5. Bai, S. L.,et al., Polypropylene/polyamide 6/polyethelene-octene elastomer blends, Part 3: mechanisms of volume dilatation during plastic damage under uniaxial tension, Polymer 4
6. Zhang, J. L., Bai, S. L., Liu, D. L. and Yu, Z. Z., “Caustic Study on Stress Singularities in Polypropylene/CaCO3 Nanocomposites with Nonionic Modifier”, Composite Science and Technology (accepted)
6(2005)6437-6446
7. Yang-Fei Zhang, Shu-Lin Bai, Da-Yong Yang and Zhong Zhang, “Viscoelastic study on epoxy surface by Nano dynamic mechanical analysis”, Journal of Polymer Science Part B: Polymer Physics, Vol.46, 281-288(2008)
8. Zhang Y.F., Bai S.L., Miao M. and Jin Y.F., “Microstructure and Mechanical Properties of an Alumina-Glass Low Temperature Co-Fired Ceramic”, J. Euro. Cera. Society, 29(2009)1077-1082
9. Zhang Y.F., Bai S.L., Li XK and Zhang Z, Viscoelastic properties of nanosilica filled epoxy composites investigated by dynamic nanoindentation, Journal of Polymer Science Part B: Polymer Physics, 2009, 47: 1030-1038
10. Li X.K. and Bai S.L., “Sheet forming of the multi-layered biaxial weft knitted fabric reinforcement. Part I: on hemispherical surfaces”, Composites: Part A, 40(2009)766-777
11. Li X.K. and Bai S.L., “Tensile properties of the multi-layered biaxial weft knitted fabric reinforced composite material”, Plastics, Rubber and Composites: Macromolecular Engineering, 2010, Vol.39, No.2, 91-98